15000 BPH drink bottles 15W CO2 laser marking machine for batch number coding
Introduction
Laser ink jet printer, in the control of computer, make the laser beam through the high frequency vibration lens and focus lens to etch equipment identification information symbols on surface.
CO2 laser printing machine’s wavelength is 10.64um,10.2um or 9.3um. It is small,and the life of laser generator is long, so it is the widely used in logo printing market. Not only it can static spray printing, but also can online dynamic spray printing. It is used for the surface printing of paper, wood, plastic, paint, glass, ceramics .
Classified by the configuration, CO2 laser printing machine mainly has 10w, 15w, 30w, 50w and 100 w power laser for enterprises to choose . If it is dynamic spray printing, the faster the power, the higher the spray printing.
YM-1210B is a 15W CO2 laser machine with a wavelength of 10.64 um. Mainly used for 15000bph water bottles , paper or plastic Packaging and other products batch number , time , barcode marking.
Technical parameters
| Model |
YM-1210B |
| Laser ink jet printer |
RF CO2 |
| Power of laser (W) |
15 |
| Maximum line velocity(mm/s) |
≦7000 |
| Wavelength of laser |
10.64um |
| Etching depth (mm) |
≦5 |
| Code range(mm) |
100×100~150×150 |
| Minimum character(mm) |
0.4 |
| Minimum line width(mm) |
0.15 |
| Positional repeatability(mm) |
±0.01mm |
| Printing form |
Dynamic code/Static code |
| Control system |
Fully automatic high speed engraving software |
| Control form |
Computer/Portable controller |
| Scan form |
High-speed two-dimensional Scanning galvanometer |
| Overall power(W) |
500,700,800 |
| Cooling form |
Air cooling |
| Power requirement |
220V,50Hz,8A |
| Work environment |
Temperature 5-45℃ humidity 5%-90% |
| Life of laser generator |
≥20000 Hours |
| Unsuitable material |
Metals/PE plastics |
Notices
- The main case should be connected with ground lead solely,the power line is based on single-phase three wire system.
- The laser machines must be operated under the environment without dew.
- The lenses of the laser machines must be kept clean.
- If the machines discharge because of wet or any other reasons,it is very necessary to shut down and overhaul the machines.
- To ensure safety by shutting down the power supply and high-pressure discharge before maintaining the machines.
Product Tags:
|
|
15W CO2 Laser Marking Machine 15000 BPH Drink Bottles For Batch Number Coding Images
|
